Tail Lamp: Service and Repair

REAR LAMP ASSEMBLY

Taurus, Sable:

Taurus X:

Removal and Installation

Taurus, Sable
1. Position the luggage compartment side trim panel aside.
2. Remove the 3 nuts and the rear lamp assembly.
- Separate the bulb holders from the rear lamp assembly.
- To install, tighten to 6 Nm (53 lb-in).

Taurus X
3. Remove the 2 screws and the rear lamp assembly.
- Separate the bulb holders from the rear lamp assembly.

All vehicles
4. To install, reverse the removal procedure.