Auxiliary Blower Motor

AUXILIARY BLOWER MOTOR







Removal and Installation

All vehicles
1. Remove the LH quarter trim panel.

Vehicles with power liftgate (PLG)
2. Disconnect the power liftgate (PLG) module electrical connector.
3. Remove the PLG module bolt.
- To install, tighten to 9 Nm (80 lb-in).

4. Remove the PLG module and bracket.

All vehicles
5. Disconnect the auxiliary blower motor electrical connector.
6. Remove the 3 auxiliary blower motor screws.
7. Remove the auxiliary blower motor.
8. Remove the auxiliary blower motor wheel clip.
9. Remove the auxiliary blower motor wheel.
10. To install, reverse the removal procedure.