Apply Components

Apply Components

C1 Clutch
The C1 clutch connects the front planetary carrier to the rear sun gear of the rear planetary set. The C1 clutch is applied in 1st (typical operation during engine braking), 2nd, 3rd and 4th gears.

C2 Clutch
The C2 clutch connects the intermediate shaft to the rear planetary carrier. The C2 clutch is applied in 4th, 5th and 6th gears.

C3 Clutch
The C3 clutch connects the front planetary carrier to the middle sun gear of the rear planetary set. The C3 clutch is applied in 3rd and 5th gears, and also in REVERSE when the vehicle speed is 7 km/h (4 mph) or less.

B1 Brake
The B1 brake locks the middle sun gear of the rear planetary gear set. The B1 brake is applied in 2nd and 6th gears.

B2 Brake
The B2 brake locks the rear planetary carrier in REVERSE gear when the vehicle speed is 7 km/h (4 mph) or less.

F1 One-Way Clutch
The F1 one-way clutch locks the counterclockwise rotation of the rear planetary carrier during 1st gear operation (during both normal operation and engine braking).