Test A: No Power in All Ignition Switch Positions

Pinpoint Test A: No Power in All Ignition Switch Positions
Refer to Vehicle/Diagrams, Power Distribution/SJB for schematic and connector information.

Normal Operation
The ignition switch receives fused battery voltage from battery junction box (BJB) fuse 14 (15A) along circuit SBB14 (BN/RD). The ignition switch has 4 possible states:
^ OFF
^ ACC
^ RUN
^ START

This pinpoint test is intended to diagnose the following:
^ Fuse
^ Wiring, terminals or connectors
^ Ignition switch
^ BJB

A1:

A1 (Continued)-A2: