Test E: DTC B2292 - Restraint System - Safety Belt Pretensioner Fault

PINPOINT TEST E: DTC B2292 - RESTRAINT SYSTEM - SAFETY BELT PRETENSIONER FAULT

Normal Operation
The restraints control module (RCM) checks all of the safety belt retractor pretensioners for faults. If the RCM detects one of the following faults on any of the safety belt retractor pretensioner circuits, it will store DTC B2292 in memory and send a message to the instrument cluster (IC) module to illuminate the air bag warning indicator.







This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Safety belt retractor pretensioner
- RCM

E1:

E2-E3:

E4-E5:

E6-E8:

E8-E10:

E10-E11:

E12-E13:

E14-E15: