Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube

Engine Lubrication Components - Exploded View

Oil Pan, Oil Pump Screen and Pickup Tube

Oil Pan, Oil Pump Screen and Pickup Tube (Part 1):

Oil Pan, Oil Pump Screen and Pickup Tube (Part 2):

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil pan.

3. NOTE: Discard the gasket and clean and inspect the gasket mating surfaces.

Remove the 2 bolts and the oil pump screen and pickup tube.
^ To install, tighten to 10 Nm (89 lb-inch).
4. To install, reverse the removal procedure.