Windshield Washer Reservoir: Service and Repair

WASHER RESERVOIR

Exploded View

Washer Pump And Reservoir:

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the RH front fender splash shield.
3. Disconnect the windshield washer pump electrical connector.

4. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. Failure to follow these instructions may result in serious personal injury.

NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.

Disconnect the washer pump hose.

5. Remove the bolt and the windshield washer reservoir filler neck.
- To install, tighten to 7 Nm (62 lb-in).

6. Remove the windshield washer reservoir fasteners and the windshield washer reservoir.
- To install, tighten to 7 Nm (62 lb-in).







7. CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may result in premature pump failure.

To install, reverse the removal procedure.
- Fill the windshield washer reservoir with windshield washer fluid.