Windshield Washer Pump: Service and Repair
WASHER PUMPExploded View
Washer Pump And Reservoir:
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the RH front fender splash shield.
3. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. Failure to follow these instructions may result in serious personal injury.
CAUTION: When installing the windshield washer pump, be careful not to damage the rubber grommet.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.
Remove the windshield washer pump.
1 Disconnect the electrical connector.
2 Disconnect the hoses.
3 Remove the windshield washer pump.
4. CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may result in premature pump failure.
To install, reverse the removal procedure.
- Fill the windshield washer reservoir with windshield washer fluid.