EGR Tube: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE TUBE

Exploded View












Removal and Installation

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire Suppression System. Failure to follow the instructions may result in serious personal injury.

With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the 2 bolts and the intake manifold shield.
- To install, tighten to 12 Nm (9 lb-ft).

3. Disconnect the EGR system module tube-to-EGR system module fitting.
- To install, tighten to 43 Nm (32 lb-ft).

4. Disconnect the EGR system module tube-to-exhaust manifold fitting.
- To install, tighten to 43 Nm (32 lb-ft).

5. Remove the EGR system module tube from the vehicle.

6. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.

To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.