Test A: The Wipers Are Inoperative

PINPOINT TEST A: THE WIPERS ARE INOPERATIVE

Normal Operation
The windshield wiper motor receives battery voltage from the battery junction box (BJB) through circuit 2025 (RD/YE), and voltage from the central junction box (CJB) through circuit 65 (DG) when the ignition switch is in the RUN or ACC position. The windshield wiper motor is grounded through circuit 676 (PK/OG) and circuit 57 (BK). The windshield wiper motor receives open and ground inputs from the multi-function switch through circuits 56 (DB/OG), 58 (WH), 61 (YE/RD) and 63 (RD). When a wiper function is selected, the multi-function switch grounds 1 of several combinations of these 4 circuits. The windshield wiper motor interprets these ground signals and performs the action requested. The multi-function switch is grounded through circuit 57 (BK).

This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- Multi-function switch
- Windshield wiper motor

A1-A2:

A2-A5:

A5-A6: