Sunroof / Moonroof Motor: Service and Repair

ROOF OPENING PANEL MOTOR

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Remove the headliner.
2. Disconnect the roof opening panel motor electrical connector.
- Remove the tie strap.

3. Remove the 3 screws and the roof opening panel motor.
- To install, tighten to 5 Nm (44 lb-in).

4. To install, reverse the removal procedure.
- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. Programming and Relearning