Test G: The Autolock Does Not Operate Correctly
PINPOINT TEST G: THE AUTOLOCK DOES NOT OPERATE CORRECTLYNormal Operation
The autolocking function causes the vehicle to automatically lock all doors when all of the following conditions are concurrently met during the current key cycle:
- All the doors are closed
- The autolocking function is active
- The ignition switch is in the ON position
- The transmission is in DRIVE (D) or REVERSE (R)
- The vehicle speed exceeds 5 km/h (3 mph)
After the initial activation of autolocking and at least 1 door has been opened, autolocking is activated again if the following conditions are concurrently met:
- All the doors are closed
- The autolocking function is active
- The ignition switch is in the ON position
- The transmission is in DRIVE (D) or REVERSE (R)
- The vehicle speed exceeds 5 km/h (3 mph)
This pinpoint test is intended to diagnose the following:
- Door ajar switches
- Vehicle speed sensor (VSS) message from the instrument cluster
- Digital transmission range (TR) sensor message from the instrument cluster
- Driver door module (DDM)
