Rear Bumper Reinforcement: Service and Repair

BUMPER - REAR

Exploded View

Part 1:

Part 2:

Special Tool(s)

Special Tool(s):

Removal and Installation
1. Remove the rear bumper cover.
2. Remove the 4 rear bumper nuts (2 each side) and the rear bumper.
- To install, tighten to 40 Nm (30 lb-ft).

3. If necessary, remove the 2 rear bumper cover brackets and rivets.
4. To install, reverse the removal procedure.
- Use the special tool to install the new rivets.