Test C: DTC B29A4 - Suppressor Right Circuit Open - Loop #1

PINPOINT TEST C: DTC B29A4 - SUPPRESSOR RIGHT CIRCUIT OPEN - LOOP #1

Normal Operation
The fire suppression module checks all of the RH fire suppressor circuits for faults. If the fire suppression module detects an open on the RH fire suppressor squib 1 circuits, it stores DTC B29A4 in memory and illuminates the fire suppression system indicator.

DTC B29A4 (Suppressor Right Circuit Open - Loop #1) - sets when the fire suppression module detects an open on the right fire suppressor squib 1 circuits 2310 (OG) and 2311 (DG). This DTC will cause the fire suppression system indicator to illuminate.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- RH fire suppressor
- Fire suppression module

C1-C3:

C3-C5: