Seat Backrest - Third Row, Bench

SEAT BACKREST-THIRD ROW, BENCH

50 Percent Backrest:

Bench Seat Backrest:

50 Percent Cushion (Part 1):

50 Percent Cushion (Part 2):

Back Seat Cushion (Part 1):

Back Seat Cushion (Part 2):

Exploded View

Removal and Installation
1. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.
2. Roll the backrest trim cover up, remove the 4 backrest latch-to-backrest frame bolts and remove the backrest frame.
- To install, tighten to 50 Nm (37 lb-ft).

3. To install, reverse the removal procedure.