Removal and Replacement

TROUGH ASSEMBLY

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Remove the roof opening panel glass.
2. With roof opening glass removed, position the roof opening panel to the CLOSED position.







3. Pull the trough assembly arms outward to release the trough assembly guide arm pins from the roof opening panel frame.







4. Deflect the trough downward in the center and pull it to one side. This will allow it to flex enough to disengage one side from the track slot.
5. With one guide disengaged, push the trough to the other side of the vehicle to disengage the opposite guide.
6. Tilt and pull trough forward and upward to remove through roof opening.
7. To install, reverse the removal procedure.