FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2007 >> Montego 2WD V6-3.0L VIN 1 >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)







Removal

1. NOTE: Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure.

2. Remove the cowl panel grille.
3. Disconnect the 3 PCM electrical connectors.
4. Remove the bolt and the PCM.

Installation
1. Install the PCM and the bolt.
- Tighten to 8 Nm (71 lb-in).

2. Connect the 3 PCM electrical connectors.
3. Install the cowl panel grille.
4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure.
5. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure.
pro multis Credits:Operation CHARM About Operation CHARM