Oil Pan Baffle

Oil Pan Baffle

Removal and Installation

CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil pump screen and pickup tube.
3. Remove the 8 nuts and the oil pan baffle.
^ To install, tighten the oil pan baffle nuts in 2 stages.
^ Stage 1: Tighten to 5 Nm (44 lb-in).
^ Stage 2: Tighten an additional 45 degrees.
4. To install, reverse the removal procedure.