Test P: The Heated Seat Does Not Operate Correctly - Seat Does Heat But the Heated Seat Indicator Does Not Illuminate, Driver

PINPOINT TEST P: THE HEATED SEAT DOES NOT OPERATE CORRECTLY - SEAT DOES HEAT BUT THE HEATED SEAT INDICATOR DOES NOT ILLUMINATE, DRIVER

P1:

P1-P3:

P3-P4:

Normal Operation
Upon receiving a signal from the dual automatic temperature control (DATC) module, the heated seat module will decrease one setting (the sequence is HI, LO, OFF, HI, etc.). When a heated seat is set to HI, both LED indicators above the heated seat control button will illuminate. When a heated seat is set to LO, only the left LED indicator will illuminate. When a heated seat is set to OFF, neither LED will be illuminated.

Possible Causes
An inoperative heated seat indicator can be caused by:
- wiring, terminals or connectors.
- a faulty heated seat module.
- a faulty DATC module.