Front Door Panel: Service and Repair
DOOR TRIM PANEL-FRONTPart 1:
Part 2:
Removal and Installation
1. Remove the exterior mirror trim cover.
2. Disconnect the exterior mirror control switch electrical connector.
3. Remove the front door handle bezel screw cover.
4. Remove the front door handle bezel screw.
5. Remove the front door handle bezel.
6. Remove the 2 front door handle trim cover screws
7. Remove the 6 front door trim panel screws.
8. CAUTION: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the door trim panel.
Position the front door trim panel by pulling straight away from the front door to release the retaining clips.
9. Disconnect the power window/door lock switch electrical connector.
10. If equipped with power memory seat, disconnect the power memory seat electrical connector.
11. Remove the front door trim panel.
12. To install, reverse the removal procedure.