EGR Tube: Service and Repair

EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE







Exploded View

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the exhaust gas recirculation (EGR) tube-to-EGR valve fitting.
- To install, tighten to 40 Nm (30 lb-ft).

3. Disconnect the exhaust manifold-to-EGR valve tube fitting from the exhaust manifold.
- To install, tighten to 40 Nm (30 lb-ft).

4. NOTE: The all wheel drive (AWD) vehicle has a shorter EGR valve tube than the front wheel drive (FWD) vehicle.

Remove the exhaust manifold-to-EGR valve tube.

5. To install, reverse the removal procedure.