Trunk / Liftgate Lock Cylinder: Service and Repair

LUGGAGE COMPARTMENT LID LOCK CYLINDER

Special Tool(s):

Special Tool(s)







Removal and Installation
1. Remove the 12 pin-type retainers and the luggage compartment lid trim panel.
2. Disconnect the luggage compartment lid lock cylinder actuating cable from the luggage compartment lid lock cylinder.
3. If equipped, disconnect the electrical connector from the luggage compartment anti-theft inhibit switch.
4. Remove the 2 rivets and the luggage compartment lid lock cylinder.
- Use the special tool to install new rivets.

5. To install, reverse the removal procedure.