Pinpoint Tests - OSC Equipped Vehicle

Special Tool(s):

Any time an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new component as required.

Shift Solenoids Pre-Diagnosis
Use the following shift solenoid operation information when carrying out pinpoint Test A.

Solenoid Operation Chart:

Solenoid Operation Chart:

Shift Solenoid Failure Mode Chart "Always Off" (part 1):

Shift Solenoid Failure Mode Chart "Always Off" (part 2):

Shift Solenoid Failure Mode Chart "Always On" (part 1):

Shift Solenoid Failure Mode Chart "Always On" (part 2):