B-Pillar Trim Panel

B-PILLAR TRIM PANEL







Exploded View

Removal and Installation
1. Remove the front and rear door scuff plates.
2. Position the front and rear door weatherstrips aside.
3. Remove the lower B-pillar trim panel.
4. Remove the safety belt D-ring cover.
5. Remove the safety belt D-ring bolt.
- To install, tighten to 40 Nm (30 lb-ft).

6. Remove the screw and the upper B-pillar trim panel.
7. To install, reverse the removal procedure.
- Check the restraint system for correct operation.