Test C: DTC 1555 - Ignition Run/Start Circuit Failure
Test C: DTC 1555 - Ignition RUN/START Circuit FailureRefer to Vehicle/Diagrams, Power Distribution for schematic and connector information.
Normal Operation
When placed in the RUN position, the ignition switch provides fused battery voltage to the following circuits:
^ 296 (WH/VT)
^ 158 (BK/PK)
^ 1717 (VT/OG)
^ 687 (GY/YE)
^ 294 (WH/LB)
When placed in the START position, the ignition switch provides fused battery voltage to the following circuits:
^ 158 (BK/PK)
^ 1717 (VT/OG)
^ 1522 (DG)
Possible Causes
^ Fuse(s)
^ Circuit open
^ Ignition switch
C1-C3:
