Compass Calibration

COMPASS CALIBRATION

1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, and wipers) and make sure all doors are closed.

Start the vehicle.

2. NOTE: To exit CAL mode before carrying out a compass adjustment, turn the ignition switch to the OFF position.

Press and hold the MODE button until CAL appears in the display, then release the MODE button.

3. NOTE: If the CAL indicator does not turn off after the vehicle is driven in a circle at least 5 times, repeat the procedure.

Drive the vehicle slowly (less than 5 km/h [3 mph]) in complete circles until CAL disappears from the display.