Rear Seat Backrest Cover - Third Row

REAR SEAT BACKREST COVER - THIRD ROW

Removal and Installation
1. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.
2. Remove the head restraint(s).

3. CAUTION: Use care when separating the seat back trim cover from the hook and loop strip, or the hook and loop strip can be torn from the seat back foam.

Release the hook and loop strips, invert the backrest trim cover and remove the 3 rows of hog rings.

4. Remove the head restraint guides.
- For bench seats, remove 4 head restraint guides.
- For 50/50 seats, remove 2 head restraint guides.

5. Remove the backrest trim cover.
- Pull the strap through the trim cover.

6. To install, reverse the removal procedure.