Rear Seat Backrest Cover - 40 Percent

REAR SEAT BACKREST COVER - 40 PERCENT

Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 40 percent rear seat backrest.
3. Push in on the head restraint adjust button and remove the head restraint assembly.
4. Release the J-clip at the bottom of the backrest trim cover and release the trim cover hook and loop strips at the back.
5. Remove the bushing.

6. CAUTION: Use care when separating the seat backrest trim cover from the hook and loop strip. The hook and loop strip can be torn from the seat backrest foam.

Release the hook and loop strips, invert the backrest trim cover and remove the 3 rows of hog rings.
- Invert the trim cover to the head restraint guide.

7. Pull the latch release strap through the backrest trim cover.
8. Lift the backrest foam pad, pinch the head restraint guide together and remove the 2 head restraint guides.
9. Remove the backrest trim cover.
10. To install, reverse the removal procedure.