Roof Opening Panel Shield
ROOF OPENING PANEL SHIELDRemoval and Installation
1. Remove the roof opening panel glass.
2. With glass removed, place roof opening panel into the CLOSED position.
3. NOTE: The 4 roof opening panel shield slides come as an assembly with the roof opening panel shield.
With roof opening panel shield in full forward position, remove the 4 Torx(R) screws.
- Remove the 2 front screws first to allow shield to slide further forward in track to expose 2 rear screws.
4. Lift the roof opening panel shield upward through roof opening.
5. To install, reverse the removal procedure.