Windshield Washer Switch: Service and Repair

Steering Column Multifunction Switch








Removal and Installation
1. Remove the steering wheel.
2. Remove the instrument cluster finish panel and the steering column upper shroud as an assembly.
^ Remove the 2 instrument cluster finish panel screws.
^ Press the sides of the upper steering column shroud inward to release it from the lower steering column shroud.
3. Remove the 3 lower steering column shroud screws and the lower shroud.
4. Disconnect the 3 electrical connectors.
5. Remove the 4 screws and the multifunction switch.
6. To install, reverse the removal procedure.