Wheel Speed Sensor - Front

Wheel Speed Sensor - Front

Wheel Speed Sensor - Front:

Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Disconnect the wheel speed sensor electrical connector.
4. Remove the 2 wheel speed sensor harness bracket bolts.
^ To install, tighten to 23 Nm (17 ft. lbs.).
5. Remove the front wheel speed sensor bolt from the knuckle and remove the wheel speed sensor.
^ To install, tighten to 23 Nm (17 ft. lbs.).
6. To install, reverse the removal procedure.