FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2006 >> Milan V6-3.0L VIN 1 >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Pinpoint Tests >> Test A: No Communication With The Anti-Lock Brake System (ABS) Module

Test A: No Communication With The Anti-Lock Brake System (ABS) Module

Pinpoint Test A: No Communication With The Anti-lock Brake System (ABS) Module

Normal Operation
The operating voltage required to supply the anti-lock brake system (ABS) module, hydraulic pump and isolation valves is in a range between 10 and 16 volts.

Fused battery voltage is supplied to the ABS module from battery junction box (BJB) fuses 10 (20A) and 36 (40A) along circuits SBB10G (YE/RD) and SBB36G (GN/RD) respectively. Fused ignition voltage is supplied to the ABS module from smart junction box (SJB) fuse 19 (10A) along CBP19H (VT/RD) and ground is provided along circuit GD123CU (BK/RD).

Possible Causes
^ Fuse(s)
^ Circuit open
^ Circuit shorted

A1-A2:




pro multis Credits:Operation CHARM About Operation CHARM