Test G: The EATC System Is Inoperative, Intermittent or Incorrect Operation

PINPOINT TEST G: THE EATC SYSTEM IS INOPERATIVE, INTERMITTENT OR INCORRECT OPERATION

G1-G7:

G8-G13:

G13 Continued:

Normal Operation
Under normal operation, the EATC module receives a ground through circuit GD116 (BK/VT). The EATC module is supplied constant battery voltage through circuit SBP07 (WH/RD) and ignition switched voltage through circuit CBP20 (YE/VT).

NOTE: For a complete explanation of the EATC system functions, refer to Description and Operation.

Possible Causes
- Fuse(s)
- An open in circuit GD116 (BK/VT), SBP07 (WH/RD) or CBP20 (YE/VT)
- EATC module