Seat Backrest Cover - Rear, 40 Percent

SEAT BACKREST COVER - REAR, 40 PERCENT

Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 40 percent rear seat backrest.
3. Release the lower J-strip, 4 J-clips and remove the staples from each side.

4. CAUTION: Use care when separating the backrest trim cover from the hook and loop strip, or the hook and loop strip can be torn from the backrest foam pad.

Partially invert the trim cover separating the hook and loop strips and remove the first row of hog rings.

5. Continue to invert the backrest trim cover separating the hook and loop strips and removing all rows of hog rings working up the backrest.
6. Remove the backrest trim cover.
7. To install, reverse the removal procedure.
8. Install the 40 percent rear seat backrest assembly.
9. Install the rear seat cushion.