Torque Specifications

Part 1:

Part 2:

Part 3:

Part 4:

Part 5:

Part 6:

WATER PUMP






Tighten numbers 1-7 to 25 Nm (18 ft. lbs.)
Tighten numbers 8-12 to 10 Nm (89 inch lbs.)

CRANKSHAFT PULLEY

Crankshaft pulley-to-crankshaft damper bolts 48 Nm (35 ft. lbs.)

PISTON ROD CAP

Piston rod cap-to-piston connecting rod nuts 35 Nm (26 ft. lbs.)

MAIN BEARING CAP






Main bearing cap bolts 80 Nm (59 ft.lbs.)

INTAKE MANIFOLD






Upper intake manifold bolts 10Nm (89 in.lbs.)






Lower Intake manifold bolts
Stage 1: Tighten bolts to 15 Nm (11 ft. lbs.).
Stage 2: Tighten bolts to 32 Nm (24 ft. lbs.).

CYLINDER HEAD






Stage 1: Tighten to 50 Nm (37 ft. lbs.).
Stage 2: Loosen the bolts one full turn.
Stage 3: Tighten to 30 Nm (22 ft. lbs.).
Stage 4: Rotate each bolt 90 degrees.
Stage 5: Rotate each bolt an additional 90 degrees.

EXHAUST MANIFOLD

Right Hand:

Left Hand:

Stage 1: Tighten bolts 10 Nm (89 inch lbs.).
Stage 2: Tighten bolts 22 Nm (16 ft. lbs.).

CAMSHAFT SPROCKET

Camshaft sprocket-to-camshaft bolt 63 Nm (46 Ft.lbs.)

OIL PAN






Tighten the oil pan bolts to 12 Nm (9 ft. lbs.).

FLEX PLATE BOLTS

Tighten the bolts in a criss-cross pattern.

Flex Plate bolts 80 Nm (59 ft.lbs.)