Fog/Driving Lamp Bulb: Service and Repair

FOG LAMP BULB

Removal and Installation

WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Grasp the bulb only by its base. Avoid touching the glass envelope.

NOTE: The fog lamp bulb should not be removed from the fog lamp until just before the new bulb is installed. Removing the bulb for an extended period of time may affect fog lamp performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector. Never turn on the fog lamps with the bulb removed.

1. Raise and support the vehicle.







2. Remove the aeroshield-to-sub frame screws.







3. Remove the seven screws and remove the aeroshield.







4. Disconnect the fog lamp assembly electrical connector.







5. Remove the fog lamp bulb.
6. To install, reverse the removal procedure.