Rear Seat Backrest Latch - 60/40 Split Backrest, Wagon

REAR SEAT BACKREST LATCH - 60/40 SPLIT BACKREST, WAGON

Removal and Installation

1. NOTE: The 60 percent portion is shown, the 40 percent seat is similar.

Remove the seat cushion.

2. Remove the rear seat backrest.
3. Disassemble the rear seat backrest.







4. Remove the bolts and the latch.

5. NOTE: Make sure the safety belt webbing is not twisted prior to installation.

To install, reverse the removal procedure.

6. Check the restraint system for correct operation.