Keyless Entry Key-Pad: Testing and Inspection

KEYLESS ENTRY KEYPAD CODE PROGRAMMING

NOTE:
- The system only allows one personal code to be programmed.
- Any existing personal code will not need to be erased to program a new one.

1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will erase the stored personal code.
3. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed. Entering any new personal code will automatically erase the old personal code.