Torque Converter
Torque Converter1. A new or remanufactured torque converter must be installed if one or more of the following statements are true:
^ A torque converter malfunction has been determined based on complete diagnostic procedures.
^ Converter stud(s), impeller hub or bushing are damaged.
^ Discoloration of the torque converter (due to overheating).
^ The torque converter is found to be out of specification when carrying out one of the following torque converter checks: One-Way Clutch Check End Play Check Stator to Turbine Interference Check Stator to Impeller Interference Check - Torque Converter Leak Check
^ Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes: Major Metallic Failure Multiple Clutches or Clutch Plate Failures Sufficient Component Wear which results in Metallic Contamination