Brake Disc Removal and Installation

Brake Disc

Removal and Installation

1. CAUTION: When removing the brake caliper anchor plate, never allow it to hang from the brake hose. Provide a suitable support.

Remove the brake caliper anchor plate bolts and discard. Position the brake caliper anchor plate aside.
^ To install, tighten to 110 Nm (81 ft. lbs.).
2. Remove and discard the brake disc screw.
^ To install, tighten to 21 Nm (15 ft. lbs.).
3. Remove the brake disc.
4. To install, reverse the removal procedure, using 2 new brake caliper anchor plate bolts.