C-Pillar Trim Panel

C-PILLAR TRIM PANEL

Removal and Installation
1. Remove the rear seat bolster.
2. Remove the C-pillar trim panel screw cover.
3. Remove the C-pillar trim panel screw.
4. Remove the lower C-pillar trim panel.
- Pull forward on the lower C-pillar trim panel to separate from the upper C-pillar trim panel.
- Position the lower C-pillar trim panel toward the inside of the vehicle.
- Separate the lower C-pillar trim panel from the rear safety belt.

5. If equipped with side curtain air bags, remove the screw cover from the upper C-pillar trim panel.
6. If equipped with side curtain air bags, remove the screw from the upper C-pillar trim panel.
7. Remove the upper C-pillar trim panel.
- Pull the front of the upper C-pillar trim panel down to release the retaining clips.
- Pull the upper C-pillar trim panel toward the front of the vehicle to remove.

8. To install, reverse the removal procedure.