Power Steering Fluid Cooler: Service and Repair

Power Steering Fluid Cooler





Material

Removal and Installation

CAUTION: When repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can result.

1. Remove the radiator grille.
2. Release the clamp and disconnect the power steering return line-to-fluid cooler hose.
^ Allow the fluid to drain into a suitable container.

3. Release the clamp and disconnect the power steering fluid cooler-to-reservoir hose.
4. Remove the 2 bolts and the power steering fluid cooler.
^ To install, tighten to 6 Nm (53 inch lbs.).

5. To install, reverse the removal procedure.
^ Fill the power steering system.