Output Shaft Speed (OSS) Sensor

Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Maintenance/Service and Repair.
2. Disconnect the output shaft speed (OSS) or turbine shaft speed (TSS) sensor electrical connector.





3. Remove the OSS or TSS sensor bolt and the sensor.
1 Remove the OSS (4) or TSS (2) sensor bolt.
2 Remove the OSS (3) or TSS (1) sensor.

4. To install, reverse the removal procedure.