Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor 3.0L (2V)

Removal and Installation





1. Disconnect the Output Shaft Speed (OSS) sensor connector.





2. NOTE: The OSS sensor is located under the RH exhaust manifold.

Remove the Output Shaft Speed (OSS) sensor cover.
1 Remove the connector.
2 Remove the bolt.
3 Remove the cover.





3. Remove the Output Shaft Speed (OSS) sensor.





4. NOTE: Lubricate the OSS O-ring before installing the sensor.

To install, reverse the removal procedure.