Thermostat-Water

Thermostat-Water
A new water thermostat should be installed only after the following mechanical test has been carried out.

Thermostat-Mechanical Test
1. Remove the water thermostat.
2. Check the water thermostat for seating. Hold the water thermostat up to a lighted background. Leakage of light around the thermostat valve at room temperature indicates that a new water thermostat should be installed. Some water thermostats have a small leakage notch at one location on the perimeter of the thermostat valve, which is considered normal.
3. Immerse the water thermostat in a boiling antifreeze and water mixture.
4. See the Specifications for water thermostat opening temperatures.