Floor Shifter

External Controls-Floor Shifter

Transmission Shift Control Linkage
The transmission shift control linkage consists of:
^ a floor console mounted shifter mechanism.
^ A shift handle that is retained on the shifter by two attaching screws.
^ a shift cable and bracket which connects to the floor console mounted shifter assembly to the manual control lever on the transmission.
^ The shift cable bracket bolts to the transmission.

Shift Interlock System
The shift interlock system consists of:
^ a shift lock actuator.
^ A transmission shift lock actuator, which clips to the actuator retainer, securing the shift lock actuator to the steering column.
^ A transmission shift lock actuator cable which routes to the floor console mounted shifter assembly lock mechanism.
^ electrical circuits to supply power to lock and unlock the shift lock actuator.

The shift lock mechanism locks the gearshift lever in PARK:
^ when the ignition switch lock cylinder is in the LOCK position.
^ with the ignition switch lock cylinder in the RUN position and the brake pedal released.

The shift lock actuator releases the gearshift lever:
^ when the ignition switch lock cylinder is in the FIRST position.
^ with the ignition switch lock cylinder in the RUN position and the brake pedal actuated.

Transmission Control Switch (TCS)
The Transmission Control Switch (TCS):
^ is located in the shifter handle.
^ The TCS is removable from the gearshift handle without disassembly of the console or shifter unit.
^ is a momentary contact switch.
^ commands the Powertrain Control Module (PCM) to disengage or engage the overdrive function of the transmission.
^ When overdrive (D) is disengaged, the message O/D OFF will illuminate on the instrument panel.