Vehicle Damage Warnings
CAUTION:- If installing only the front passenger seat cushion trim cover, the seat occupant classification sensor (OCS) must be rezeroed.
- The following precautions must be taken before rezeroing of the OCS system.
- Make sure the OCS system components are connected and no faults are present.
- Make sure the vehicle has not been exposed to temperatures below 6°C (42°F) or above 36°C (97°F) within four hours prior to the rezeroing process. If the vehicle has been exposed to temperatures outside the temperature limits (6-36°C), the vehicle must be exposed to and kept at a temperature within the limits for minimum of four hours.
- Make sure nothing is present on the passenger seat before rezeroing and nothing is placed on the seat during the rezeroing process.
- Make sure a minimum five second time period has passed after cycling the ignition switch ON before the rezeroing process.