Fuel Tank Unit: Service and Repair

REMOVAL
1. Remove the fuel tank.
2. Disconnect the pressure transducer connector on the top rear corner of the fuel tank.
3. Clean the area around the fuel pump mounting flange.







4. Remove the bolts and the fuel pump.

CAUTION: The fuel pump must be handled carefully to avoid damage to the float arm and the filter.

5. Remove and discard the fuel pump mounting gasket.

INSTALLATION
1. Clean the fuel pump mounting flange and the fuel tank mounting surface.
2. Install a fuel pump mounting gasket on the mounting flange.







3. Install the fuel pump.
1 Position the fuel pump in the fuel tank.
2 Install the bolts.

NOTE: Tighten fuel pump bolts in a star pattern.

4. Connect the pressure transducer connector on the top rear corner of the fuel tank.
5. Install the fuel tank.