Compass Calibration

1. Start the vehicle.

NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defroster, heater, A/C, map lamps, and wipers) and make sure all doors are closed.

2. Press and hold the MODE button until CAL appears in the display, then release the MODE button.

NOTE: To exit CAL mode before carrying out a compass adjustment, turn the ignition switch to the OFF position.

3. Drive the vehicle slowly (less then 5 km/h) in complete circles until CAL disappears from the display.

NOTE: If the CAL indicator does not turn off after the vehicle has been driven in a circle no more than five times, demagnetize the vehicle and repeat the procedure.