Wagon

REMOVAL
1. Remove the second row seat cushion and seat backrest.


Wagon-passenger side







2. Remove the nuts and the LATCH attaching brackets.

NOTE: Apply Threadlock 262 to the studs before installing the nuts.

Wagon-driver side inboard







3. Remove the nuts and the seat back rear pivot bracket.

NOTE: Apply Threadlock 262 to the studs before installing the nuts.

Wagon-driver side outboard







4. Remove the nuts and the LATCH attaching bracket.

NOTE: Apply Threadlock 262 to the studs before installing the nuts.

INSTALLATION
1. To install, reverse the removal procedure.
^ Apply Threadlock 262 to the studs before installing the nuts.